2. Revit Architectural Tutorials
Contact Us on WhatsApp for Any Help

2. Revit Architectural Tutorials

Revit Architecture -4 : Adding and creating new Material and Layers in floor

If you're stepping into the world of BIM with Revit, creating a floor is one of the fundamental modeling tasks you'll need to master early on. Whether you're working on a residential house, a commercial building, or even a complex MEP layout—floors act as essential reference levels and structural components. Let's break down the process step by step.

🧱 What is a Floor in Revit?

In Revit, a floor is more than just a surface—it’s a parametric building element that can include materials, layers (like concrete, insulation, tile), and even slope definitions. Floors are intelligent and interactive; they connect with walls, slabs, and structural framing.

🔧 Steps to Create a Floor in Revit (2026)

1. Open the Appropriate View

  • Go to a Floor Plan View (Level 1 ).
  • You can also use a section or 3D view for adjustments after creation.

2. Go to the Floor Tool

  • From the Architecture tab, click on Floor → choose Floor: Architectural .

3. Sketch the Boundary

  • You’ll enter Sketch Mode, which turns the ribbon pink/purple.
  • Use the Line, Rectangle, Pick Walls, or Spline tools to draw the shape of your floor.
  • select Line
  • create boundary

4. Define Properties

Before you finish the sketch:

  • Set the floor type (e.g., 6" Concrete, Generic Floor, Timber Slab).
  • Adjust offset from level if needed.
  • Modify slope arrows for drainage if necessary.

5. Finish the Sketch

  • Click the green checkmark (✔) to create the floor.
  • If Revit detects overlapping elements or gaps, it will prompt you with a warning.

Revit Architecture -5: Create & Edit Walls in Revit

Welcome to this step-by-step tutorial on how to create, modify, and edit walls in Revit. This guide will walk you through everything you need to know, from wall selection to material settings, providing you with the knowledge to enhance your architectural designs.

🌟 1. Getting Started with Wall Creation

Step 1: Selecting a Wall

  1. Go to the Architecture Tab.
  2. Click on Wall from the drop-down options.
  3. You'll see various wall types available. Choose the Basic Wall category.

🏗️ Tip: There are different wall types like exterior walls, each with different sizes. Pick one based on your project needs.

Step 2: Editing Wall Types

  1. After selecting a wall, click on Edit Type.
  2. In the Edit Type dialog box, you’ll see the wall layers.
  3. These layers can include materials like fiberglass. Each layer has its physical and thermal properties.
  4. Choose a wall and click Edit to adjust its layers, such as switching it to concrete for a more durable option.

🔨 2. Modifying Wall Constraints

Step 1: Setting Constraints

  1. For a concrete wall, select the wall and set the Base Constraint to Ground Floor.
  2. Set the Top Constraint to Third Floor or whichever floor you desire.

🏠 Pro Tip: Constraints are important to ensure that your wall extends to the correct height and aligns with your building structure.

Step 2: Understanding Wall Placement

  • The wall will appear aligned based on centerline or finish face:
    • Centerline: Half the wall is on the floor, and half is above.
    • Finish Face Exterior: Entire wall rests on the floor.
    • Finish Face Interior: Wall extends out of the floor.

⚙️ 3. Wall Shape Modification

Step 1: Editing Wall Profiles

  1. Select the wall you want to edit.
  2. Click on Edit Profile.
  3. Use tools like Circle to cut holes in the wall or to modify the shape.

Step 2: Copying and Placing Shapes

  1. Select the Copy command to duplicate any shape.
  2. Click on Modify Copy to place it in the desired location.

🔄 Tip: You can create complex shapes or designs by using the Profile editing tools.

🎨 4. Changing Wall Materials

Step 1: Editing Wall Material

  1. Select the wall and click Edit Type again.
  2. Choose the material from the list, like brick or gypsum.
  3. Click OK to apply the changes.

🧱 Pro Tip: If you change the material of one wall, walls with the same name and type will automatically update to reflect the same material.

Step 2: Assigning Different Materials

  1. If you want to assign a different material, select the wall, then click Edit Type.
  2. Change the wall thickness to adjust the material properties (e.g., 0.5 inches for a thinner wall).

📏 Tip: Changing the material and thickness only affects the selected wall, not others, unless they share the same name.

🛠️ 5. Adding Layers to Walls

Step 1: Inserting Layers

  1. Select the wall and click Edit.
  2. Use the Insert option to add new layers.
  3. Specify the thickness and material for the layer (e.g., Concrete).

🧱 Bonus Tip: Adding layers allows you to build complex walls that have multiple materials for improved insulation, soundproofing, etc.

Step 2: Editing Material and Layer Thickness

  1. For advanced designs, you can add materials like stone by selecting Create New Material.
  2. Adjust the thickness of each layer for a custom look and functionality.

🔄 6. Finalizing and Updating Walls

Step 1: Renaming Walls

  1. Give each wall a name, such as Duplicate North Wall, to help identify and organize them.
  2. Use the Edit Type feature to update the wall properties and apply material changes.

Step 2: Applying Consistent Changes

  • To ensure uniformity, select a wall and change its material properties (like switching to stone). All walls of the same name will automatically adjust.

🏗️ Tip: Always ensure that the wall names are consistent if you want to apply the same material or changes across multiple walls at once.

🏁 Conclusion

Congratulations! You now know how to:

  • Create and modify walls with various properties.
  • Edit wall shapes and apply different materials.
  • Add layers and update wall types for a customized architectural design.

In the next lesson, we'll explore how to place doors into your walls for a complete structure. Stay tuned!

Revit Architecture -6: Create Partition (Internal) Walls


In this tutorial, we’ll walk you through the process of creating and modifying internal partition walls in Revit. Partition walls are essential for separating different spaces within a building. This tutorial will guide you step-by-step, using symbols, signs, and clear sections to ensure you understand every detail!

1. Introduction: What Are Partition Walls?

Partition walls, also known as internal walls, are used to divide larger spaces into smaller rooms or sections. These walls are typically thinner and lighter than external walls. Creating partition walls is an essential skill in Revit for efficient space planning.

2. Selecting and Creating a Partition Wall

Step 1: Choose the Partition Wall

  • Open Revit and go to the Architecture tab.
  • From the Wall tool, choose Partition Wall from the Property Palette.

Step 2: Edit Wall Type

  • With the partition wall selected, click Edit Type from the Properties panel.
  • In the Edit Type window, you can customize the wall properties. For example, change the wall name for easier identification.

3. Modifying the Wall’s Materials and Properties

Step 1: Change Wall Material

  • Once inside the Edit Type window, locate the Material section.
  • By default, partition walls are made of brick. If you wish to change the material, click Edit next to the material. ⚙️ Example: The wall is made from Common Brick, but you can change it to Colored Plaster or Tiles.

Step 2: Select Tile Material

  • Click on Appearance to access the Asset Browser.
  • Search for materials such as Ceiling Ceramics or Tile and select the appropriate type. Once you find the tile material you want, click OK. 🎨 Material Change Summary: The partition wall will now be made of tiles instead of brick!

4. Applying Partition Walls to Rooms

Step 1: Create Rooms

  • Now that your wall has been customized, let’s create rooms using these partition walls.
  • For example, you can create a bedroom and a bathroom with specific dimensions. Let’s say each bathroom will be 7x7 feet.

Step 2: Use the Mirror Tool for Symmetry

  • If you need a mirrored version of the wall, select the wall and use the Mirror tool.
  • To do this:
    • Select the wall, then click on the Mirror tool.
    • Draw the mirror line to create a symmetrical partition. 🔄 Tip: This tool is perfect for quickly creating symmetrical rooms or bathrooms!

5. Adding More Partition Walls to Create Additional Rooms

Step 1: Create Additional Rooms

  • You can now create more spaces. For example, create another room or a hall by adding more partition walls. 🏠 Example: Let’s create a hall between the two bedrooms using a new partition wall.

Step 2: Customize the Wall Material

  • Once your partition walls are in place, you can go back to Edit Type and change the wall material again.
    • For instance, change the material to color or another type to fit your design needs. 🎨 Final Look: All your partition walls are now tailored to your project’s design!

6. Creating Additional Features (Kitchen, Dining Area, Stairs)

Step 1: Add More Areas

  • Next, let’s add a kitchen or dining area.
    • Select Partition Wall again and create boundaries for your kitchen and dining areas.

Step 2: Use the Join Tool

  • After setting the partition walls for each room, use the Join Tool to connect walls where needed.
    • For example, join the partition wall of the kitchen to the dining area. 🔗 Join Tool Tip: This tool helps link walls together for a seamless design.

7. Closing or Opening Areas

Step 1: Close Open Spaces

  • You can close or open areas by adjusting the partition wall layout.
    • For example, if the kitchen needs to be closed off, adjust the partitions accordingly. 🚪 Closing/Opening Spaces: Adjust the partition layout to fit the needs of your design.

8. Conclusion: Creating Efficient Partition Walls

You’ve successfully learned how to:

  • Create and customize partition walls.
  • Modify materials for a more personalized design.
  • Use tools like Mirror, Join, and Edit Type to optimize your wall design.

🔨 Pro Tip: Partition walls are an essential part of any architectural project. Mastering their creation and modification will help you design more effective and efficient floor plans.

In the next tutorial, we will explore how to place doors and windows into your newly created partitions!